GC Intura N2 Gas Generators
Peak
Whether you use a simple GC or a complex setup, the models 250, 600, and 1000 offer performance adapted to varying needs.
The Intura N2 range from Peak Scientific models 250, 600, and 1000 offers GC & GC-MS laboratories an ultra-pure nitrogen solution and constant, with flow rates adapted to different needs.
Advantages
- GC Intura N2 250 Gas Generator
- GC Intura N2 600 Gas Generator
- GC Intura N2 1000 Gas Generator
Designed to ensure a continuous and stable production of nitrogen intended for detector make-up gas, the Intura Nitrogen range integrates advanced multi-stage purification technology, guaranteeing your Gas Chromatography (GC) system exceptionally pure nitrogen, among the best on the market.
Its new optimized PSA purifier allows for a considerable reduction in the amount of compressed air required for the generation of very high purity nitrogen. This innovation results in lower energy consumption, a reduction in heat produced and, consequently, reduced operating costs, while limiting the impact on laboratory HVAC systems and the environment.
Thanks to Intura, GC users benefit from total peace of mind, with a safe, reliable, and practical gas supply solution, capable of ensuring constant performance without the constraints associated with traditional gas cylinders.
Intura N2 250
Maximum nitrogen flow: 250 cc/min
Maximum outlet pressure: 100 psi / 6.9 bar
Nitrogen purity: ≥ 99.9995%
CO₂: < 10 ppm
Power consumption: 40 W — 100 / 240 V, 50 / 60 Hz
Dimensions (HxWxD): 220 × 330 × 520 mm
Weight: 20 kg
Noise level: < 35 dB(A)
Intura N2 600
Maximum nitrogen flow: 600 cc/min
Maximum outlet pressure: 100 psi / 6.9 bar
Nitrogen purity: ≥ 99.9995%
Power consumption: 40 W (or depending on configuration 100–240 V, 50/60 Hz)
Dimensions (HxWxD): 220 × 330 × 520 mm
Weight: 20 kg
Applications: GC & GC-MS (detector gas / make-up gas / supplementary gas)
Intura N2 1000
Maximum nitrogen flow: 1000 cc/min (1 L/min)
Maximum outlet pressure: 100 psi / 6.9 bar
Nitrogen purity: ≥ 99.9995%
Power consumption: 40 W — 100 / 240 V, 50 / 60 Hz
Dimensions (HxWxD): 220 × 330 × 520 mm
Weight: 20 kg
Applications: GC & GC-MS (detector gas / make-up gas / supplementary gas)
Detector gas or make-up gas for GC (Gas Chromatography) and GC-MS.
Carrier gas or sweep gas, depending on configuration, for analytical instruments requiring UHP (Ultra-High Purity) nitrogen.
Replacement of nitrogen cylinders in laboratories to provide a safer, reliable, continuous gas supply, and one that is less dependent on external logistics.